×
sentek logo

Case Study Category: 8. Firmware

Network settings_PLUS-MULTI (all modems)

This download includes a .zip file containing Network Setting files for all currently supported modems used with Sentek Plus and MULTI Internet firmware. Files should be extracted from the .zip file and the appropriate configuration file can be restored to the Sentek Plus-MULTI probe using the Probe Configuration software. Configurations for Current Modems ================================= Sentek […]


Read More

Drill & Drop Series III, Modbus Firmware (“Brickless”)

This firmware is intended for use in “brickless” (Series III) Drill & Drop probes and provides Modbus functionality. To select between Plus and MULTI the appropriate firmware must be loaded. The SAME physical hardware may be used as either Plus or MULTI mode. The firmware image loaded controls the behaviour. Notes: The default temperature compensation […]


Read More

Drill & Drop Series III, Plus-MULTI Firmware (“Brickless”)

This firmware is intended for use in Series III or “brickless” Drill & Drop probes and provides functionality to connect the probe to either Sentek Plus or MULTI DTUs. The Series III Drill & Drop probes offer flexibility to move between RS232 and RS485 connectivity. The SAME physical hardware may be used as either Plus […]


Read More

Drill & Drop SDI-12 Firmware

Supersedes Drill & Drop Firmware version 1.0.4 This version supports long probes, skipped sensors and latches sensor configuration on setting serial number or upgrading from previous versions not yet latched. Notes: Power consumption for the measurement will be reduced from previous versions. Firmware fixes an issue measuring 9 TriSCAN sensors miss-reported the time required to […]


Read More

SDI-12 Series II Firmware Version

The Sentek SDI-12 Firmware download contains a Firmware image file (which also launches the Firmware Upload Wizard). The Firmware Upload Wizard is used to field-upgrade the firmware in Sentek EnviroSCAN, EasyAG and Drill & Drop** probes. **Only the Drill & Drop probes with the external EnviroSCAN interface are compatible with Series II firmware.


Read More

Plus & MULTI DTU Satellite Firmware

This download contains an executable file and readme file. The executable file launches the firmware wizard used to install Sentek PLUS-MULTI Satellite firmware on a Sentek RS485 or RS232 logging interface board.


Read More

PLUS/MULTI (Internet) Firmware (Ver. 1.9.1)

Please refer to the TXT file “Release Notes and Changes” for detailed documentation regarding this and previous versions.    


Read More

SOLO Firmware

A full release providing new features and enhancements to the basic functionality while keeping the code base in-line with the other firmware (WEB/Modbus/SDI-12). The main End-User features are: • Support for version 2.5 EnviroSCAN ASIC sensor, including: detection and default calibration equation. • Salinity model (Model-X v2.2) for EnviroSCAN ASIC sensors. • New default address […]


Read More

Modbus RS232/485

A full release providing new features and enhancements to the basic functionality while keeping the code base in-line with the other firmware (WEB/Solo/SDI-12). The main End-User features are: • Support for version 2.5 EnviroSCAN ASIC sensor, including: detection and default calibration equation. • Salinity model (Model-X v2.2) for EnviroSCAN ASIC sensors. • New default address […]


Read More

MULTI DTU Firmware (Ver.1.0.2)

This download contains a firmware upload wizard which enables dealers to update Sentek MULTI DTU firmware via the Front Panel connection.


Read More

SoloPORTER Firmware

This download contains the file needed to upgrade the firmware of a SoloPORTER. For instructions on how to use, please refer to the SoloPORTER Upgrade Guide (included here).


Read More

Diviner 2000 firmware Version 1.1.22

Diviner 2000 firmware Version 1.1.22


Read More

Sentek SMCP2 Firmware

The Sentek SMCP2 Firmware download is a Zip file which contains a Firmware image file (which also launches the Firmware Upload Wizard) and a Readme file for the firmware. This Firmware Upload Wizard is used to field-upgrade the firmware in Sentek EnviroSCAN and EasyAG RS232, RS485 and Voltage probe interfaces.


Read More

Sentek Voltage Firmware

The Sentek Voltage Firmware download is a Zip file which contains a Firmware image file (which also launches the Firmware Upload Wizard) and a Readme file for the firmware. The Firmware Upload Wizard is used to field-upgrade the firmware in Sentek EnviroSCAN and EasyAG Voltage probe interfaces.


Read More