×
sentek logo

Case Study Category: 7. Manuals

SoloPORTER System Manual

SoloPORTER System Manual considers the entire operating system – the replaces use of the individual SoloPORTER Hardware Manual and EnviroSCAN Solo Hardware Manual. Contains information about Drill & Drop Solo compatible probes. Also contains information about the updated Solo Head Unit (DTU battery box).


Read More

Sentek SDI-12 Series II Manual (Ver 1.1)

For Sentek dealers and integrators, how to use Sentek’s SDI-12 Series II interfaces with the EnviroSCAN and Drill & Drop probes. For Series I manuals, please contact Sentek.


Read More

Sentek SDI-12 Series III Manual

Sentek SDI-12 Series III Drill & Drop probes. These are the probes with the built-in SDI-12 interface which enables full SDI-12 functionality and configuration.


Read More

Probe Configuration Utility Manual

Probe Configuration Utility Manual The application is available here: PConfig


Read More

Sentek Drill & Drop probe manual

Technical manual covering the use and specifications for Sentek Drill & Drop Probes.  V1.3 change is to improve understanding of sensor type information shown on SDI-12 probes. The manual is designed to be used in conjunction with the Sentek product manual for the data transfer system being used, i.e. SOLO/MULTI/Plus/SDI-12. The manual covers all current […]


Read More

Sentek AWS Hardware Manual

This download contains a pdf copy of the full technical manual for the Sentek AWS (Automatic Weather Station). For installation instructions, please see the Sentek AWS installation manual.


Read More

Sentek AWS Installation Manual

PDF instructions intended to assist with installation and setup of the Sentek AWS (Automatic Weather Station). For more detailed technical information about teh Sentek AWS, see the Sentek AWS Hardware Manual.


Read More

Sentek PLUS All-in-One & Compact Manual (V1.1)

The Sentek PLUS All-in-One Hardware Manual download is a pdf document written for Sentek Distributors to explain how to use the Sentek PLUS All-in-One probes and Compact data transmission units. Additional information for checking signal strength for the NTC-100 modem is provided in the separate addendum PDF file. // Changes in Revision 1.1 (12/Nov/2015) ———————————— […]


Read More

SoluSAMPLER Instruction Manual

Explains the correct method for using the Sentek SoluSAMPLER range of products.


Read More

Sentek Modbus Manual RS485/232 (Ver. 3.6)

The Sentek Modbus Interface Manual download is a pdf document written for Sentek distributors and integrators to explain how to use Sentek’s RS485 & RS232 Modbus interfaces with the EnviroSCAN, EasyAG and Dril l& Drop probes.


Read More

Sentek Plus Hardware Manual (Ver. 2.1)

The Sentek Plus Hardware Manual download is a pdf document written for Sentek Distributors to explain how to use the Sentek Plus data transmission units, and the Sentek Plus EnviroSCAN & EasyAG Plus probes. Additional information for checking signal strength for the NTC-100 modem is provided in the separate addendum PDF file. // Changes in […]


Read More

Sentek MULTI Hardware Manual (V2.0)

How to use the Sentek MULTI EnviroSCAN probe, data transmission unit, and other inputs. Additional information for checking signal strength for the NTC-100 modem is provided in the separate addendum PDF file.


Read More

SoloPORTER Hardware Manual

Manual to assist with use of the SOLO data transfer system.


Read More

Moisture Calibration Manual

Provides information needed to decide whether absolute soil moisture values are necessary, and how to obtain these absolute values from the Sentek range of soil moisture sensors.


Read More

Sentek RT6 Hardware Manual (Ver. 3.2)

Written for Sentek distributors to explain how to use the Sentek RT6 logging system and the 5-Wire EnviroSCAN & EasyAG probes.


Read More

Sentek Voltage Manual

Explains how to use Sentek’s Series II Voltage interfaces with the EnviroSCAN & EasyAG probes. For Series I manuals, please contact Sentek or a Sentek agent.


Read More

Sentek Current Manual

The Sentek Current Manual download is a pdf document written for Sentek distributors and integrators to explain how to use Sentek’s Current interfaces with the EnviroSCAN & EasyAG probes.


Read More

TriSCAN User Manual

To assist Sentek Distributors and End Users with the data interpretation and use of Sentek’s range of TriSCAN sensors.


Read More

Sentek Solo Hardware Manual (Ver. 1.4)

Written for Sentek Distributors to explain how to use & configure Sentek Solo and EasyAG Solo probes.


Read More