×
sentek logo

Case Study Category: 6. Telemetry & DTU

Network settings_PLUS-MULTI (all modems)

This download includes a .zip file containing Network Setting files for all currently supported modems used with Sentek Plus and MULTI Internet firmware. Files should be extracted from the .zip file and the appropriate configuration file can be restored to the Sentek Plus-MULTI probe using the Probe Configuration software. Configurations for Current Modems ================================= Sentek […]


Read More

SoloPORTER System Manual

SoloPORTER System Manual considers the entire operating system – the replaces use of the individual SoloPORTER Hardware Manual and EnviroSCAN Solo Hardware Manual. Contains information about Drill & Drop Solo compatible probes. Also contains information about the updated Solo Head Unit (DTU battery box).


Read More

Quick Guide, Sentek PLUS Response Codes

Important:  refer to the full manual for detailed understanding of Test and Upload results as shown in PConfig for PLUS:  PLUS Hardware Manual This is a simplified extract from the manual, to support testing and troubleshooting Sentek PLUS DTU. It shows the list of Result Codes from a Test/Upload  – as shown in the PConfig […]


Read More

Plus & MULTI DTU Satellite Firmware

This download contains an executable file and readme file. The executable file launches the firmware wizard used to install Sentek PLUS-MULTI Satellite firmware on a Sentek RS485 or RS232 logging interface board.


Read More

USB Sentek MULTI Front Panel drivers

A compressed zip file which contains the Windows drivers needed to communicate with the Sentek MULTI probes through the Front Panel, and instructions on how to install them.


Read More

PLUS/MULTI (Internet) Firmware (Ver. 1.9.1)

Please refer to the TXT file “Release Notes and Changes” for detailed documentation regarding this and previous versions.    


Read More

SOLO Firmware

A full release providing new features and enhancements to the basic functionality while keeping the code base in-line with the other firmware (WEB/Modbus/SDI-12). The main End-User features are: • Support for version 2.5 EnviroSCAN ASIC sensor, including: detection and default calibration equation. • Salinity model (Model-X v2.2) for EnviroSCAN ASIC sensors. • New default address […]


Read More

Sentek PLUS All-in-One & Compact Manual (V1.1)

The Sentek PLUS All-in-One Hardware Manual download is a pdf document written for Sentek Distributors to explain how to use the Sentek PLUS All-in-One probes and Compact data transmission units. Additional information for checking signal strength for the NTC-100 modem is provided in the separate addendum PDF file. // Changes in Revision 1.1 (12/Nov/2015) ———————————— […]


Read More

Sentek Plus Hardware Manual (Ver. 2.1)

The Sentek Plus Hardware Manual download is a pdf document written for Sentek Distributors to explain how to use the Sentek Plus data transmission units, and the Sentek Plus EnviroSCAN & EasyAG Plus probes. Additional information for checking signal strength for the NTC-100 modem is provided in the separate addendum PDF file. // Changes in […]


Read More

Sentek MULTI Hardware Manual (V2.0)

How to use the Sentek MULTI EnviroSCAN probe, data transmission unit, and other inputs. Additional information for checking signal strength for the NTC-100 modem is provided in the separate addendum PDF file.


Read More

SoloPORTER Hardware Manual

Manual to assist with use of the SOLO data transfer system.


Read More

MULTI DTU Firmware (Ver.1.0.2)

This download contains a firmware upload wizard which enables dealers to update Sentek MULTI DTU firmware via the Front Panel connection.


Read More

SoloPORTER Firmware

This download contains the file needed to upgrade the firmware of a SoloPORTER. For instructions on how to use, please refer to the SoloPORTER Upgrade Guide (included here).


Read More

Sentek RT6 Hardware Manual (Ver. 3.2)

Written for Sentek distributors to explain how to use the Sentek RT6 logging system and the 5-Wire EnviroSCAN & EasyAG probes.


Read More

Sentek Solo Hardware Manual (Ver. 1.4)

Written for Sentek Distributors to explain how to use & configure Sentek Solo and EasyAG Solo probes.


Read More